When the unbreakable foreign matter passes through the crushing chamber or the machine is overloaded for some reason, the spring insurance system realizes the insurance, the discharge port is enlarged, and the foreign matter is discharged from the crushing chamber. If the foreign matter is stuck in the ore, the clearing system can be used to continue the discharge. Increase to allow foreign matter to be removed from the crushing chamber. Under the action of the spring, the discharge port is automatically reset and the machine resumes normal operation. There are three kinds of coarse crushing cone crusher, medium crushing cone crusher and fine crushing cone crusher, which can be purchased according to different needs of users.

When the cone crusher is working, the rotation of the motor is rotated by a belt pulley or a coupling, a cone crusher drive shaft and a conical crusher conical portion under a urging of the eccentric sleeve. Therefore, the broken wall of the crushing cone is close to and sometimes leaves the surface of the rolling wall fixed on the adjusting sleeve, so that the ore is continuously subjected to impact, pressing and bending in the crushing chamber to realize the crushing of the ore. The motor drives the eccentric sleeve to rotate by the bevel gear, so that the crushing cone rotates. The crushing cone is close to and then leaves the fixed cone to complete the crushing and discharging. The joint between the support sleeve and the frame body is pressed by the spring. When the crusher falls into a non-breakable object such as a metal block, the spring is compressed and deformed to discharge foreign matter, thereby achieving insurance and preventing damage to the machine. The cone crusher realizes the insurance of the cone-type crusher spring insurance system when the non-breakable foreign matter passes through the crushing chamber or the machine is overloaded for some reason, and the discharge port of the cone crusher increases. The foreign matter is discharged from the crushing chamber of the cone crusher. If the foreign matter is stuck in the ore, the clearing system can be used, so that the ore discharge continues to increase, so that the foreign matter is discharged from the crushing chamber of the cone crusher. Under the action of the spring, the cone crusher automatically resets the discharge port, and the cone crusher machine resumes normal operation. The surface of the crushing chamber is covered with a wear-resistant high manganese steel liner. The size of the discharge port is adjusted hydraulically or manually.